BCO         BPO         CCO         CPO         FPO         LXO         MKO         NTO        VTO         LBL
 BLO         CBO         CHO         CTC         LPO         MBO        MTO         PCO         HRO         LBLC
 BMO        CBP         CLO          CXO        LCO         MIO          NEO         TCO        LBV          LBB  

EQUIPMENT CATEGORIES

Accumulators	Grinders	Homogenizers	Scrubbers
Air Coolers	Demineralizers	Hoppers	Separators / Strainers
Bag Dumpers	Dryers	Incinerators	Shaker Boxes
Bagging Lines	Dryers - Air	Instruments & Controls / Control Valves	Shrink Wrap
Bearings	Dryers - Fluid Bed	Light / Heavy Construction Equipment	Sifters / Screeners / Separators
Blenders - Ribbon	Ejectors	Machine Shop Tools & Equipment	Silencers
Blending Systems	Evaporators	Material Handling Equip., Tools & Vehicles	Silos & Related Equipment
Blending - Twin Cone	Extruders & Related Equipment	Mixing Equipment	Spare Parts & Renewal Parts
Blower Units	Feeders & Polishers	Molding Units - Injection	Steel Drums & Wood Pallets
Blown Film	Filling Equipment	Motors & Eddy Current	Switchgear
Boilers & Heaters	Filters - Line Type	Nonferrous Scrap Materials	Tanks
Buildings	Filters - Oil type	Office, Cafeteria, Laboratory & R&D Related Equipment	Tote Bins
Case Packers / Erectors	Filter units - Bag Type	Oxidation Systems & Flare Units	Towers / Columns
Centrifuges	Gas Plant / Oilfield Equipment	Palletizers & De-Palletizers	Transformers
Chillers & A/C Equipment	Gear Boxes	Pelletizers	Turbines - Gas & Steam
Compressors	Generator Sets	Pumps	Valves, Fittings, Flanges & Pipe / Tubing
Computer & Telep. Equipment	Heat Exchangers - Plate	Pumps - Vacuum	Vessels
Conveyors	Heat Exchangers - Shell & Tube	Reactors

CPO-26E3-1 - Air Cooler - 1650 ft2 bare x (2) cells, total 3,300 ft2 bare, type 210-360 WGA20F11K-FIN, 650 psi at 450 deg. F, 2 pass tubes, 1" dia tubes with 2 1/2" O.D. alum. Fins - 11 per inch type "G" - K-FINS, estimated weight per section 16,750 lbs., total jointed structure 16 ft W x 30 1/2 ft L x 14 ft H, 20 HP driven Hartzell fan units **SOLD**

Bulk Product Packaging System

MASTER CONVEYOR CORP. SYSTEM BAGGING / BOXING LINES
(Prior Service: Packaging System for Polyethylene Pellets)

Both Lines assembled in parallel and function independently. Approximate overall floor space dimensions necessary for re-installation - 95 ft wide and 65 ft. long.

HDPE Boxing Line Description:
Master Conveyor System - 1100 lbs. (500 kg) per box, 20 boxes per hour capacity / 480 volt, 3 ph, 60 Hz system rating

Liner Inflation Blower
Box Placement Conveyor - 3 pallet capacity, 1 HP drive motor
Fill Point Conveyor - Chain driven rollers - 2-1/2 in. Rollers on 4-1/2 in. centers w/ pop-up grid table, unit mounted on framework attached to Electro scale Model 3030 Platform Scale
Take Away Conveyor
Filled Box Accumulator Conveyor - Gravity roller 2-1/2 in. rollers on 4 in. centers, 51 in. long
Automatic Pallet Dispenser - 20 pallet capacity, ¾ HP drive motor
Box Filling Vibration - Cleveland Model GT-4750-20-6-4, TENV motor drives
Semi automatic Banding Station - Signode Power Strap Feeder / Pallet Void Feeding Attachment / Overhead Jib Suspension w/cable / Strap Dispenser / Girth Strap Director
Walk-Ways / Platforms / Stairs
Modicon Controls / Operating Panel

Bagging Line Description:
Olinkraft Model 207 Sackmatic Twin Bag Packers w/ 10 to 16 Bag Capacity per minute, 150 Bag Capacity, with Bag Hanger Opener, Gusset Reformer and Sealer In feed, Bag weight 50 Lbs. +/- 0.05 lbs., 480 volt, 3 ph, 60 Hz system rating

Howe Richardson Model E50C Duplex Type Product Weight Scales, 50 lb. capacity, +/- 1.0 ounce, Self Cleaning Type, Auto Reset, Dump Counter
Metal Detector System, Alarm and Marker Optional for Operation
Pre-Rotator, Rotates Bag for visible Bag Markings on all four sides of pallet
Model 400A Stretch Wrapping Unit
Printing Head System for Bag Labeling
In-Line Check Weigh Scales, Bag Marker Rejection, Metal Detection, with automatic conveyor re-routing for recycling
Elevator Flattener - Positions, Lifts and Flattens Bags for even product packaging
Conveyors - (a) Reject, (b) Empty Pallet, (c) Stretch Wrap In Feed 1 and 2, (d) Pallet Exit and (e) Full Pallet Accumulated
Walk-Ways / Platforms / Stairs
Modicon Controls / Operating Panel 

JPG photos available by E-Mail.

Early '70s vintage
Manual chair bag feeder - (3) bag feed system
Fills poly 50 lb bags and 100 lb boxes
Stainless steel filling tubes
Air packer
Relay control logics
(3) operators - bag & load palletizer
Overall condition - fair to good
Both poly or paper bag filling
Self sealing
Bag rotator
Bag labeler
Surge hopper
Spider shrink wrapper station
Weight scales
Conveyors & rollers
Some spare parts available at site
Spare parts still available from mfg'er. for this equipment 

TCO - QTY (3) HW NORTH CONICAL BLENDERS, SIZE 14.75, TYPE 45 DEGREES, 1100 FT3 WORKING CAPACITY EACH, 1650 FT3 TOTAL CAPACITY, 150 HP AT 12 RPM, S/N CB2003-1 (TYPICAL), LIW56-61, 14' - 9" ID, MATERIAL OF CONSTRUCTION CARBON STEEL WITH TYPE 304-20% CLAD INTERVALS, 18" DIA CHARGE AND DISCHARGE, REDUCER HORSBURG & SCOTT RD-4000, APPROXIMATELY 50,000 LB. EMPTY WEIGHT, 83,000 LBS. LOADED WEIGHT AT 30 LBS./FT2 DENSITY

LPO-LABL907 Blender twin co Twin Cone Blender, 3500 cu ft working volume, 5400 cu ft total volume.  304 SS clad; driven by 350 hp motor which turns the blender at 6 rpm through a gear reducer; max capacity is 130000 lbs.

CPCOR-02 - BLOWER, MODEL 5-MV-B, S/N 135890, FULLER

CPCOR-03-BLOWER, ROOTS CONNERSVILLE MOD RAS 1015

CPCOR-04-BLOWER: Rotary Positive, 12in Inlet, 12in Outlet, ROOTS CONNERSVILLE MOD RCDH

CPCOR-05-BLOWER: Horizontal, Type RAI, MOD 76RAI, SER NO 7211790, P/N 823-365-020 ROOTS CONNERSVILLE

MCO-1 - ROOTS ROTARY LOBE BLOWER SIZE 12 x 36, S/N 40689

MCO-2 - ROOTS ROTARY LOBE BLOWER SIZE 10 x 22 JV S/N 41164

MCO-3 - ROOTS ROTARY LOBE BLOWER, SIZE 717 JV RAS, S/N 81-37118

MCO-6 - ROOTS ROTARY LOBE BLOWER, SIZE 99F8455D 624 JV, RCS, WHISPAIR

TCO-B1 - ROOTS BLOWER 10 x 12 RAS, S/N 18987 #2978, RECON

TCO-B2 - ROOTS CONVEYOR BLOWER 10 x 15 RCR, S/N 24092, #30913, RECON OSS

TCO-B3 - ROOTS BLOWER, NO INFO, 10 x 12

TCO-B4 - ROOTS ROTARY LOBE BLOWER, S/N 8721262 710 AF, ID-820-289-320

TCO-B8 - QTY (12) SILO BLOWER PACKAGES AND ASSOCIATED CONVEYING PIPING - NATIONAL CONVEYOR CO, 1228-DS-CF20 AT SILO LOCATIONS

TCO-B9 - QTY (4) ROOTS BLOWER PACKAGES: (2) BLOWERS 10 x 18 ¾ RAS, 100 DEG F, 2450 CFM @ 7.3 PSIG, 14.7 PSI INLET, 1160 RPM - DRIVER:  GE 100 HP, 440/3/60, 1180 RPM, FRAME 8144S, TYPE K, GREASE LUBE, DLAC5, BEARING TYPE AFBM75RN03 - (1) BLOWER ROOTS LOBE 10 x 18 RAS - (1) BLOWER ROOTS LOBE 10 x 18 ¾ RAS, WITH AC 125 HP MOTOR, 1180 RPM, TYPE GZ-CH, 440/3/60, FRAME 505UZ 

TCOB-10 - DRESS-RICH BLOWER PACKAGE (B1468), SKID MOUNTED, M/N 62H, P/N 851480LB, WITH BELT DRIVER ELECTRIC MOTOR 75 HP, TYPE TFS, 230/460/3/60, FRAME 365T, EXHAUST SILENCER
 

MIO832A - 33EX0001 1-1/2" Lab Extruder System, Egan Powerflight F004471-02, 24:1 L/D, split clamp design, Sterling 4" blown film die and air ring, driver: 15 HP with cooling blower, reducer ratio 5:1, sheave ratio 1.38, motor speed 1750 rpm, reducer speed 1250 rpm, max. screw speed 250 rpm, assembled with reducer, oil circulation system, water circulation system, split clamp, heaters and junction box, 1-1/2" feed hopper, circa 1978. Single turret winder - 14 inch diameter X 22 inch face, film cast line - 22" roll face, 18 Spartan flex lip die, air knife unit and die cart. **SOLD**

MIO832B - 33EX0002 1-1/2" Lab Extruder System, Egan Powerflight F004471-03, Model AB-30-4"DL, S/N 89-22900, 24:1 L/D, split clamp design, Sterling 4" blown film die and air ring, driver: 15 HP with cooling blower, reducer ratio 5:1, sheave ratio 1.38, motor speed 1750 rpm, reducer speed 1250 rpm, max. screw speed 250 rpm, assembled with reducer, oil circulation system, water circulation system, split clamp, heaters and junction box, 1-1/2" feed hopper, circa 1978. Single turret winder - 14 inch diameter X 22 inch face, film cast line - 22" roll face, 18 Spartan flex lip die, air knife unit and die cart. Components missing on this unit No. 33EX0002 - some heater bands, (1) water circulator band on the barrel assembly, most of the controller boards on the take-up & winder controls, idler rolls and take up nip assembly and some components from the main power assembly cabinet. **SOLD**

CLO-M/N 13M - Qty. (2) ZURN Industries packaged boilers, Model 13M, 42,000 lbs./hr. capacity, 640 psig steam outlet at saturated temp., #2 oil and fuel gas fired, design feed water temp. 228 deg. F, 1% blow down, 18,450 BTUs/lb. (#2 oil), 19,450 BTUs/lb. (fuel gas), outdoor type installation, furnace volume 812 ft3, furnace 520 ft2, boiler 3,647 ft2, total 4,167 ft2, 38 in. upper drum, 24 in. lower drum at 9 ft.-9 in. C.L. to C.L., 1975 ft2 extended surface economizer, 86% min. thermal efficiency, stack 100 ft., approx. 91,000 lbs. weight, installed in 1979 as standby steam supply units with very little use during installed time. JPG photos available. 

CCO-B-1605 - CE-INC/HOLMAN BOILER, WATER TUBE, MODEL 27-VP-12W, SUPER HEATER, NATURAL GAS OR #6 HEAVY OIL FIELD, BUILT 1977, 80,000 LBS./BR CAPACITY, DESIGN 675 PSI, BOILER 1150 PSI - 3778 FT2 WATER WALL 800 PSI - 637 FT2, 1015 PSI SUPER HEATER, 750 DEGREES F TEMP OUT, 612 PSI PRESS. OUT, 212 DEGREES F FEED WATER OUT, AUTO FIRING METHOD, 79.15 OIL/74.65 GAS EFFICIENCY, 42" DIA UPPER DRUM, 30" DIA LOWER DRUM, APPROXIMATELY 11' - 9" W x 33' L x 15' - 6" H, 30 FT STACK. 

CPCB - GENERAL CORRUGATED MACHINERY, MODEL 47. CORRUGATED CASE FORMER & BOTTOM FLAP GLUER, S/N CF9473, NORDSON SERIES 3500V HOT MELT MATERIAL APPLICATOR - 14:1 PISTON PUMP, TRANSPORT SYSTEM, COMPRESSION STATION, FEED SYSTEM, FORMING SECTION, STANDARD CASE SIZE 8 X 6 X 5 (MIN) & 18 X 15 X 12 (MAX), CPM (MAX) :20, AMPS@ 230V:20, AIR CFM: 13.65, MCC, VAC UNIT.      **SOLD**

WAC.1 - York Liquid Chiller, Model YCWZ77CC-46PA, S/N 718780, Refrigerant - R22, 460V/3PH/60HZ, Factory Test Pressure: 300 PSIG - Low/High Side, Refrigerant Charge: System 1/70 lbs., System 2/70 lbs., Minimum Circuit Amp 155, Max Dual Element Fuse Size 200, Max. Circuit Breaker - Size 200, Compressor 460V/3PH/60HZ/RLA 68.8, LRA 297, Compressor Model ZB6S2-D46/50S, P/N 365-25385-005, S/N GGDRO74275, Test Pressure 450 PSIG, 460V/3PH/60HZ, FW-LRA = 363, PW-LRA = 297

WAC.2 - Standby York Chiller Unit, M/N LCH75W-46XA, S/N DYO79920, High Side Test PSIG 300, Low Side Test PSIG 150, Refrigerant R22, 460V/3PH/60HZ, Compressor - York, M/N JS63N, S/N A1049038-7428D12, 460V/3PH/60HZ, RLA 103, LRA 490, Test PSIG 450 H.S., 330 L.S.

WAC.3 - Qty. (2) Carrier 30GB125-150 Flotronic Reciprocating Liquid Chillers, Power Systems & Controls, Rotary Power Conditioner - Series MG Quick Panel Jr. II, GE Micro Versa Trip Plus Cat. TP2525TTEIC, S/N 150952, 120VAC, GE Spectra Rms - Mag-Break 400 AMP/3Pole/600VAC ABB, EH 260 3 Pole, 400 A Terminal, Chiller Pump Switchboard Encl. Type 1, Volts 480Y/277/60HZ, Max. Supply Rating 1200 AMPS Cat. 45-2250005-EO Square D - Type QED Switchboard, Circuit Breakers 1-250A / 2-100A / 1-400A / 1-200A / 1-60A / 1-300A.

CCO - D4-0901 – VILTER SKID MOUNTED CHILLER – 4412-R12 FLOODED/AIR COOLED UNICHILLER, 45.8 TONS COMPRESSOR CAPACITY, 15 DEG F SUCTION AT 17.8 PSIG, 125 DEG F CONDENSING AT 171.4 PSIG, KRACK CORPORATION AIR COOLED CONDENSER VERTICAL UP FLOW AIR DISCHARGE, MODEL 400-600 VA – 60,000 CFM, 2 FAN, 7 ½ HP, R-12, BRAKE HP 86.2, 930 RPM, 460-3-60, CONTROLS 120V, SKID 10” – 6” W x 8’ – 3” H x 28’ – 2” L, APPROXIMATELY 24,000 LBS. 

CHO.SP30176 - NUTEMP CHILLER UNIT, CAT NO M/N ABTE1060, S/N L95G07062, MAX CONC INPUT 347 DEGREES F, 115 PSIG STEAM, MAX FUSE SIZE 90, MIN CIRCUIT AMPACITY 52, PUMP OVERLOAD KW 27.0, TRANSFORMER 0.75 KVA, TRANS ABSORPTION COLD GENERATOR ABSORPTION LIQUID CHILLER, (2) STAGE, 1995 CONSTRUCTION, NATIONAL BOARD #221553, PSI 400.  

MIO-02 - VILTER CHILLER, SPRING LOADED COMPRESSOR TYPE, M/N VCM340, SKID MOUNTED, PORTABLE COOLING STATION WITH 20 HP ELECTRIC MOTOR DRIVE.

LAO-01 - SOUTHWEST REFRIGERATION SYSTEMS PACKAGED UNIT, 90 TONS CAPACITY AT 90 DEG. F COOLING WATER, MYCOM 88 COMPRESSOR, 200 HP DRIVER, OIL SEPARATOR, REFRIGERANT CONDENSER, RECEIVER, FILTER/ DRYER, METHANOL FEED CHILLER,, VENT GAS CHILLER,, SUCTION DRUM, COMPRESSOR OIL SYSTEM WITH HEATER, DESIGNED FOR R-22 REFRIGERANT OR AMMONIA REFRIGERANT, ASME CODE STAMPED FOR 300 PSIG, SKID 8 FEET WIDE X 9 FEET HIGH X 25 FEET LONG.

CPCOR-01 - Carrier Chiller Unit, M/N-3O HW A 035-A-600 RA, s/n-2195F50284, Volts 460, PH3 60 HZ, Liquid Chiller, (1) Compressor.

CPCOR-02 - Carrier Chiller Unit, M/N- 30 HW B 035-D-620 RA, s/n - 4202Q02076, Volts 460, PH3 60 HZ, Liquid Chiller, (1) Compressor, Digital

CPCSWY16-023 - QTY. (2) INGERSOLL-RAND ETHYLENE REFRIG. COMPRESSORS, CENTRIFUGAL-MULTI STAGE UNCOOLED - SINGLE FLOW TANDEM SERIES, SIZE MTG-733/633, MASS FLOW 24,080 LBS./HR., VOLUME FLOW 5,460 SCFM, SUCTION PRESSURE 0.5 PSIG, DISCHARGE PRESSURE 64.3 PSIG, COMPRESSION STAGES 7 FIRST/6 SECOND, ROTATION FACING COUPLING CW, NORMAL SPEED 8650 RPM, MAX. CONT. 9080 RPM, TRIP SPEED 10,000 RPM, S/N B-1966 & B-1967.

CPCSWY16-021 & 16-021A - QTY. (2) INGERSOLL-RAND CRACKED GAS COMPRESSORS, CENTRIFUGAL - SINGLE FLOW - UNCOOLED - MULTI STAGE, SIZE MTG-833, MASS FLOW 55,500 LBS/HR., VOLUME FLOW 15,350 SCFM, SUCTION PRESSURE 111.3 PSIG, DISCHARGE PRESSURE 480.3 PSIG, COMPRESSION STAGES 8, NORMAL SPEED 9,350 RPM, MAX. CONT. 9820 RPM, TRIP SPEED 10,800 RPM, S/N B-1964 & B-1965.

CPCSWY16-019 & 16-019A - QTY. (4) INGERSOLL-RAND CRACKED GAS COMPRESSORS ARRANGED IN (2) SERIES - TANDEM SETS, CENTRIFUGAL - SINGLE FLOW - UNCOOLED - MULTI-STAGE, SIZE MTG-552/MTG-742, MASS FLOW 62,100 LBS/HR., VOLUME FLOW 16,150 SCFM, SUCTION PRESSURE 6 PSIG, DISCHARGE PRESSURE 128.3 PSIG, COMPRESSION STAGES 5 FIRST/7 SECOND, NORMAL SPEED 6,500 RPM, MAX. CONT. 7,035 RPM, TRIP SPEED 7,750 RPM, S/N'S B-1960/1961/1962/1963.

CPCSWY16-025 & 16-25A - QTY. (2) INGERSOLL-RAND PROPYLENE REFRIG. COMPRESSORS, CENTRIFUGAL - SINGLE FLOW - UNCOOLED - MULTI STAGE, SIZE MTG-752, MASS FLOW 126,000 LBS/HR, VOLUME FLOW 18,950 SCFM, SUCTION PRESSURE 3.3 PSIG, DISCHARGE PRESSURE 255.3 PSIG, COMPRESSION STAGES 7, NORMAL SPEED 5,950 RPM, MAX. CONT. 6,250 RPM, TRIP SPEED 6,930 RPM, S/N B-1968 & 1969.

GGCBL-301 - WORTHINGTON CORPORATION TYPE DEMAG, SIZE VK-18, S/N T-82011, CONTINUOUS SERVICE AIR COMPRESSOR, REBUILT 2004 AND REMOVED FROM SERVICE NOVEMBER 2007, (4) STAGE DESIGN, COMPLETE WITH: BULL GEAR, INTERCOOLERS, LUBE OIL SYSTEM, INSTRUMENTATION, SILENCERS, CONSTANT PRESSURE CONTROL SYSTEM, ANTISURGE CONTROL SYSTEM, VIBRATION AND ALARM SYSTEM, INLET AIR FILTER & MOTOR DRIVES - E.M. - 3000 H.P., 4160V/3/60, 1200 RPM, P.F. 100%, 6 POLE, OUTDOOR WEATHER - PROTECTED TYPE II, S/N 166161811.

DESIGN DATA:
STAGE                                                     1ST         2ND         3RD         4TH

GAS HANDLED                                     AIR
BAROMETER - PSIA                            14.7
WEIGHT FLOW, LBS/MIN. DRY        849.5
INLET PRESSURE - PSIA                     14.7         26.1         46.7         83.4
TEMPERATURE - DEGREE - F             95          108          108          152.6
REL. HUMIDITY - CENT.                      55           64           100            52
MOLE. WEIGHT - M                             28.62      28.62       28.62         28.62
CP/CV - K                                                1.395
COMPRESSIBILITY - Z                         1
INLET VOLUME - FT3/MIN.             12,250     7,050         3,920         2,370
DISCHARGE PRESS. - PSIA                 26.4         46.9         83.5         139.7
TEMPERATURE - DEGREE - F          221.5      233.6         240.8         280
COMPRESSIBILITY - Z                                                                             1
BULL GEAR SPEED - RPM                                                                   1200
H.P. REQ'D BY DRIVER                                                                         2700

CPCORG - IR RECIPROCATING AIR COMPRESSOR, SIZE 12 & 7x7, RPM 750, DISCH PRESS - 105 PSIG, YEAR 1998, WITH AIR DYNE CONTROL PANEL, M/N MDL, 12 & 7x7, PHE-2-NL, SKID MOUNTED.

CPCORG - IR RECIPROCATING AIR COMPRESSOR, S/N PH7133, SIZE 12 & 7x 7, RPM 750, DISCH PRESS 250 PSIG YEAR 1990, SKID MOUNTED.  

MIO - 01 DRESSER-RAND RECIPROCATING COMPRESSOR UNIT, TYPE WA2PHE-2-NL, S/N X2XE118,  720 MAX RPM, RATED 600 RPM, 300 MIN. RPM, 2 THROW, CYL. #1 – 14 x 6, CYL. #2 -  9 x 6, DISC VALVES, 6” – 150 # SUCTION AND DISCHARGE, MAWP 1ST STAGE 125 #, MAWP 2ND STAGE 660 #, CAPACITY: 2377 / 2091 LBS. / HR., INLET CFM 440 / 466, MM SCFD / SCFM 0.73 / 0.68, DRIVER:125 HP, IND. TYPE MOTOR, 1800 RPM, COMPLETE OPERATING SKID MOUNTED UNIT, APPROX. FLOOR SPACE 15 FT. L x 6.5 FT. W x 7 FT. H. DETAILED SPECS AND JPG PHOTOS AVAILABLE FOR THE EQUIPMENT.

CPO-26C2 - Clark Compressor CMA-2-1, single recip. Cylinder 11" L 9 1/4" C.I., driver G.E. 200 HP, M/N 5K26336HY1, WP II, sleeve bearing, type K, frame 6336, 12 pole, 600 RPM, 4000/3/60

 LPO-C-202E/F - Qty. (2) Clark MALB-48 high pressure gas compressors - Stage 1/ Stage 2 as follows: 3,515/17,315 psi inlet, 105/105 deg. F inlet, 17,615/40,015 psi discharge, 215/190 deg. F, 80,000/90,100 lb. pin load, 3500 BHP, 31,850 lbs./hr., 240 rpm, cylinders 2-11/16 X 8/ 2-1/4 X 8, ethylene service.

LPO-AB2C3201E/F Qty. (2) Cooper Bessemer FM-4 multi-stage recip. recycle compressors, 2 stage primary and 3 stage flash gas service. Primary - design 565/1406 psi, 100/105 deg. F inlet, 1422/3615 psi discharge, 211/220 deg. F discharge, 10,410 lbs./hr., 282 BHP, cylinders 4-1/2 X 10-1/2 & 3-3/4 X 10-1/2, 3500/6000 psig, top suction. Flash gas - design 16/51.2/191 psi, 105/105/105 deg. F inlet, 58.2/201/640 psi discharge, 272/278/256 deg. F discharge, 4,000 lbs./hr., 338 BHP, cylinders 19 X 10-1/2// 15-1/2 X 10-1/2// 8-1/4 X 10-1/2, 200/400/700 psig, top suction.

                                                                                                                   /CYL  /    CYL      /
ITEM #/ DESCRIPTION/ HP/ ACFM/ PSIA IN/ PSIA OUT/ TYPE/ SIZE/ STROKE/ RPM/ MFG/ MODEL #

LPO-S2C811 - Vent Gas recyc,  100,  889,  215,  580,  IR,  EHS

LPO-LABC809A - Recycle 2nd St.,  100,  113,  78,  349.7,  Recip.,  8-1/4,  11,  327, Worthington, HBB

LPO-LABC809B - Recycle 2nd St.,  100,  113,  78,  349.7,  Recip.,  8-1/4,  11,  327,  Worthington,  HBB

LPO-LEFC807 - Ethylene Boost,  100,  2050#/HR,  615,  760,  Recip.,  4,  7,  611,  Pennsylvania Pump,  3FCPL

LPO-LCDC985 - Ethylene Boost,  100,  5000#/HR,  267.5,  540.8,  Recip.,  4-3/4,  7,  504,  Dresser Rand,  ESH-1 NL

LPO-LCDC803A - Recycle,  125,  1,  310,  Recip.,  17& 4-3/4,  11,  360,  Dresser Rand,  ESH-2

LPO-LCDC803B - Recycle,  125,  1,  310,  Recip.,  17& 4-3/4,  11,  360,  Dresser Rand, ESH-2

LPO-LEFC805A - Recycle,  125,   4050#/HR,  1,  310,  Recip.,  17& 4-3/4,  11,  360,  Dresser Rand,  ESH-2

LPO-LEFC805B -  Recycle, 125,  4050#/HR,   1,  310,  Recip.,  17& 4-3/4,  11,  360,  Dresser Rand,  ESH-2

LPO-LEFC805C - Recycle,  125,  4050#/HR,   1,  310,  Recip.,  17& 4-3/4,  11,  360,  Dresser Rand,  ESH-2

LPO-LABC801A - Recycle,  125,  1,  310,  Recip.,  17& 4-3/4,  11,  360,  Dresser Rand,  ESH-2

LPO-LABC801B - Recycle,  125,  1,  310,  Recip.,  17& 4-3/4,  11,  360,  Dresser Rand, ESH-2

LPO-S1C502 LP - Vent Gas,  125,  404,  19.8,  239,  Recip.,  12x7.5x11,  400,  IR,  ESH-2-NL-2

LPO-S2C851 - Vent Gas recyc,  150,  400,  5,  225,  12x7.5x11,  IR,  ESH-2-NL-2

LPO-LCDC823A - Recycle 2nd St.,  150,  300,  71,  350,  Recip.,  10,  13,  327,  Cooper Penjax,  3-ATP-CP

LPO-LCDC823B - Recycle 2nd St.,  150,  300,  71,  350,  Recip.,  10,  13,  327,  Cooper Penjax,  3-ATP-CP

LPO-S1C501 HP Vent Gas -  200,  1394,  196,  588,  Recip.,  7.5x11,  400,  IR,  ESH-1-NL-2

LPO-AB2C3202G/H - Sec. Ehthylene,  3500,  3515,  40015,  Recip.,  2-11/16&2.25,  8,  240,  Clark,  MALB-48

LPO-C508A - Nitrogen,  3,  1800,

LPO-C508B - Nitrogen,  3,  1800,   

LPO-LABL801A&B Poly dryer con Polymer dryer conveyor 2 stage, Jacket 100 psi @ 300F Shell 30 psi @ 300F approximately 30" dia by 30 ft long both stages - screws driven by 15 hp motor; CS construction Alameda Tank Co

LPO-LCDL812C&D Poly dryer con Polymer dryer conveyor 2 stage, Jacket 100 psi @ 300F; Shell 30 psi @ 300F approximately 30" dia by 30 ft long both stages - screws driven by 15 hp motor; CS construction Alameda Tank Co

LPO-LCAB805C&D Purge conveyor Twin screw, jacketed conveyor - 100 psig jacket; ATM shell, CS both sides; 30" dia by 10' long The Conveyor Co

LPO-LCDL812C&D Purge conveyor Twin screw, jacketed conveyor - 100 psig jacket, ATM shell, CS both sides; 30" dia by 10' long The Conveyor Co

LPO-S1V1555 Dryer Fluid Bed Approximate dimensions are 8' wide x 14' deep x 15' high; includes 25 psi removable steam coil bundle VULCAN

LPO-S2V654 Dryer Fluid Bed Approximate dimensions are 8' wide x 11' deep x 15' high; includes removable steam coil bundle; also available is the dryer cyclone item #V676; 3'7" OD x 15' 11" OAH METAL ARTS

MIO832A - 33EX0001 1-1/2" Lab Extruder System, Egan Powerflight F004471-02, 24:1 L/D, split clamp design, Sterling 4" blown film die and air ring, driver: 15 HP with cooling blower, reducer ratio 5:1, sheave ratio 1.38, motor speed 1750 rpm, reducer speed 1250 rpm, max. screw speed 250 rpm, assembled with reducer, oil circulation system, water circulation system, split clamp, heaters and junction box, 1-1/2" feed hopper, circa 1978. Single turret winder - 14 inch diameter X 22 inch face, film cast line - 22" roll face, 18 Spartan flex lip die, air knife unit and die cart. **SOLD**

MIO832B - 33EX0002 1-1/2" Lab Extruder System, Egan Powerflight F004471-03, Model AB-30-4"DL, S/N 89-22900, 24:1 L/D, split clamp design, Sterling 4" blown film die and air ring, driver: 15 HP with cooling blower, reducer ratio 5:1, sheave ratio 1.38, motor speed 1750 rpm, reducer speed 1250 rpm, max. screw speed 250 rpm, assembled with reducer, oil circulation system, water circulation system, split clamp, heaters and junction box, 1-1/2" feed hopper, circa 1978. Single turret winder - 14 inch diameter X 22 inch face, film cast line - 22" roll face, 18 Spartan flex lip die, air knife unit and die cart. Components missing on this unit No. 33EX0002 - some heater bands, (1) water circulator band on the barrel assembly, most of the controller boards on the take-up & winder controls, idler rolls and take up nip assembly and some components from the main power assembly cabinet.  **SOLD**

PRC-155.747 - Coperion extruder (Werner & Pfhleiderer): ZSK57, 50 HP, 200-350 lb/hr PP, unit was run at 400 lbs/hr., screws: twin bi-lobal - diameter 57mm - co-rotating, barrel sections: 8 sections - all barrels Nitrided, electrically heated - water cooled, gear box: ratio 2.8:1 - output speed - plant ran at 320 RPM. screw torque: 960 Nm/shaft torque, the torque on extruder is currently limited by the 50 HP motor at 200N-m and if a larger motor and gearbox were used, the screws are rated at for a maximum torque of 50kpm per shaft = 490 N-m per shaft or 980 N-m for both shafts. Unit still installed.  

PRC-886126 - Farrel 4LMSD continuous non-aim mixer - side discharge, used for compounding polymers, 750 lbs/hr 8 HLMI-HDPE, 1500 lb/hr 0.8 MI-I-LDPE, equipped with DC motor with SCR speed drive control, Flender SEN160 2.304/1 reduction gear R.H., drive 150 HP, chrome plated interior mixing chamber - rotors - hopper, electric heat - cooling coil - hopper cooling, PLC controlled, Luwa VACOREX 90/90 gear pump, mixer weight 2000 lbs. Unit still installed.   

CPCORG1 - Reactive Extruder, Century ZSK70 MC Twin Screw, 13 Barrels; 52 L/D with 3693mm stack length, Metallurgy: Nitrided Steel, Capacity: 2000 lbs/hr of EMCM, Driver: 800 HP @ 1150 rpm. **SOLD**

CPCORG2 - Stripping Extruder, Century 92mm MC Twin Screw, 12 Barrels; 48 L/D with 4456mm stack length, Metallurgy: Nitrided Steel, Capacity: 2000 lbs/hr of EMCM, Driver: 1500 HP @ 1004 rpm. **SOLD**

LPO-L-940 A & B, (2) Two, Type P 254-9SW Japan Steel Works Extruders; Screw OD-254, L/D-9, RPM-90, Drive Motor General Electric, Output-400 HP, Manf. # 2-420289, Manufactured 1968. JSW Gear Reducer, Helical Gears Double Reduction, Cap.-400 HP, High Speed / Low Speed Shaft RPM-1710/90, Gear Ratio-19.04/1, Tooth Count; HS Pinion-29, HS Gear-128, LS Gear-151, LS Pinion-35. Rebuilt by Lufkin Industries-1998.  **SOLD**

LPO-L-823 (1) One, Japan Steel Works Extruder; Type-P305-10SW, Screw RPM-100max, Reducer Type-DRS 132-RHPT, Reducer Cap. 600 HP, Reduction Ratio 1/11.4, Manf. # 2-690734, Manf. 1971, 12” Dia. Screw, L/D: 10, system includes Fly Knife underwater Pelletizer (L-822) and Mixer Feed Hopper. Material characteristics and Extruder duty – Charge material: Hot viscous PE. Feed melt index: 0.1 to 20, Feed Specific Gravity; 0.94 to 0.96, Extruder Cap: 10,000 lbs/hr (at MI=12)-6,500 lbs/H (at MI=0.3), Extruding PSI: 2,500 – 5,000 max., Pellet Size: Approx. 1/8” dia by 1/8” long. (NOTE: Driver not included)

LPO-L-940 A & B, (2) Two, Type P 254-9SW Japan Steel Works Extruders; Screw OD-254, L/D-9, RPM-90, Drive Motor General Electric, Output-400 HP, Manf. # 2-420289, Manufactured 1968. JSW Gear Reducer, Helical Gears Double Reduction, Cap.-400 HP, High Speed / Low Speed Shaft RPM-1710/90, Gear Ratio-19.04/1, Tooth Count; HS Pinion-29, HS Gear-128, LS Gear-151, LS Pinion-35. Rebuilt by Lufkin Industries-1998. 

LPO-L-941 A & B, (2) Two, Farrel Continuous Mixers; Driver: General Electric 1250 HP Induction Motor, FR-83095, Type-K, 60Hz, RPM-1780, w/ Eaton Dynamatic Oiler, Farrel Gear Reducer S/N-67A40721.

LPO-AB2L3229H Mixer/Extruder Farrel Model 12" dual headed product melt extruder; 300 HP with molten feed hopper and fly knife underwater pelletizer; max line capacity 6000 lbs/hr Farrel

LPO-LDL922 Mixer/Extruder Baker Perkins KOKNEADER Model UP-250-EMM with 1500 HP motor; 10" dia screw extruder with 300 HP DC motor; 10" power feeder; missing Farrel Birmingham cutter; max line capacity 5,000 lbs./hr Baker Perkins

LPO-LDL923 Mixer/Extruder Baker Perkins KOKNEADER Model UP-250-EMM with 1500 HP motor; 10" dia screw extruder with 300 HP DC motor; 10" power feeder; missing Farrel Birmingham cutter; max line capacity 5,000 lbs./hr Baker Perkins

LPO-LCL969 Mixer/Extruder L969 Farrel Model 9CM continuous intensive mixer with 1500 HP motor; mixer feeds L970 Farrel 15" dia screw extruder with 700 HP motor; system includes feed hopper; missing fly knife underwater pelletizer; max line capacity 7,500 lbs./hr Farrel

LPO-REL240 & 41I Mixer/Extruder Complete Farrel mixer; extruder is missing motor and fly knife cutter Farrel

LPO-AB2L3229G Mixer/Extruder Farrel model 12" dual headed product melt extruder; 300 HP with molten feed hopper and fly knife underwater pelletizer; max line capacity 6000 lbs/hr Farrel

LPO-REL3241J Mixer/Extruder Farrel repro extruder; missing fly knife Farrel

LPO-REL240 & 41H Mixer/Extruder, only gear remaining for mixer; Farrel extruder only barrel remaining Farrel

LPO-REL240 & 41G Mixer/Extruder Farrel mixer; extruder, missing fluid coupling drive and fly knife cutter Farrel

CPCB5 - K-TRON MODEL WF300 DIGI-DRIVE GRAVIMETRIC FIBER FEEDER WITH BASE STAND, RATE 1000 LBS/HR., GENERAL PURPOSE - 34 TO 40 LBS/ FT2 DENSITY.

CPCORG - FE 3316 & FE 3315,ACRISON FEEDERS, 1 TROUGH 35" L X 20 " W, 10" AUGER - FE 3316- 6' L , 3315 2 TROUGH 35' L X 20" W, 16" AUGER X 5' L, 5 HP DRIVER.  Photos Folder\CPCORG.SCREW FEEDER.jpg

CPCPAS.1 - Qty. (2) SEMCO INC. ROTARY FEEDERS, TEX-VEYOR, MODEL-XXHD-16, W/RELIANT ELECTRIC MASTER XL SPEED REDUCER, SZ 56CM16A, 1750 RPM, 1.91 HP, 24" FLG. X 15-1/4" ID.

APC-9" variable rate screw feeder, 10 ft 5 in overall length screw conveyor of 304 stainless steel, 440 to 8.82 lbs./hr, powder conveyor design, max 500 MICR - min 50 MICR, stainless steel product contact parts, 10" discharge, 18" x 36" inlet, 2 HP variable driver - 30:1 ratio reducer, approx. 21 1/8" W x 23 7/8" H x 10' 5" O.A.L., with feed storage tank - 60" dia x 13' 5 1/2" S/FF, 304 stainless construction, vert., ring support, bottom electric vibrators, 3728 lbs. weight, 10" disked head, top inlet, 14" x 18" manway. **SOLD**

LPO-B3803 - SLY constructed, model STJ-88-8 Turbojet Dust Collector w/ walkway and support, installed 1998 - like new condition, 304 stainless steel construction, 5000 CFM, 6.51/1 AC ratio, 5ft - 10in square X 18 ft to top of guard rail, @ 26 ft ground to top rail guard, (64) snap-in bags, 16 oz., 765 ft2, 5-3/4" dia. X 8 ft long, 12 gauge thk. shell assembly, 60 degree slope bottom to 8" SLY hand operated slide valve discharge to 55 gal. drum arrangement, approx. weight 4,500 lbs. (house only excluding structures, ladders, rail, pipe, etc.), with blower package

PRC-59F-9532 - SMOOT CO. BAG HOUSE VENT FILTER, M/N 58FR9, 30 ½" L x 30 1/2" W x 105" H, VERTICAL, HOUSING STAINLESS STEEL, FILTER MEDIA POLYPROPYLENE, PRODUCT CONTACT SURFACE TYPE 304 STAINLESS, FILTER AREA 65 FT2, 9 FILTER BAGS: 5 ¾" DIA x 60" H, OPERATING RANGE: 20" H2O VAC. AND 12" H2O PRESSURE, BAG HOUSE STILL INSTALLED AT SITE.

APC-201 -Qty (5) Flex-Kleen filter - Model 100 CT-120 (II), 1440 ft2 cloth area, 50 to 500 MIRCRON dust size at 37.5 lbs/ft3 density, 248oF, outdoor type, 5,500 lbs weight, 40" W.G. press, 16 oz. Polyester felt bags - S.S. ground wire, 10 gauge steel, 1/4" thk dished head, 8' 6" dia x 13' 2" O.A.H., 90 bags 100" lg, PLASITE 7122 interior coating, 17.5 SCFM compressed air req'd at 90-100 psig, 20" outlet, (2) 20" x 48" hinged access door, (2) headers feed (20) inlet locations. **SOLD**

APC-206.2 -Flex-Kleen filter - Model 100-CTBC-168-108 (IIIG), 100" long bags, approx 120" dia x 22' 4" O.A.H., dished head, cone bottom to 8" discharge, vert support ring design, (7) 18" x 35" explosion vents, 30" top-side outlet, 6" dia header feeds (22) inlet locations, 20" x 44" access hinged door, filter tube sheet 10' I.D. x 10' 6" O.D. x 1/4" thk. **SOLD**

VTO-01 - MICRO AIR DUST COLLECTOR M/N MC80D

VTO-02 - JET DUST COLLECTOR M/N DC500, 2 HP, 1 PH, S/N 675-4088, 115/220 VOLT

CLO702 -Skid-mounted Lubrication System - Integral skid-mounted lubrication system with duplex pumps and filtration and plate/frame heat exchanger.
Filtration: Duplex Flex Line filters, rated for 150 psi at 450F, S/N:11988, Model:FL141VE1921513,
Heat Exchanger: ITT Plate Flow Heat Exchanger Model:PF21, S/N:92X50499-02, P/N:5-626-21-013-007,
80 gallon reservoir with Chromalox 3 KW 480V heater, Chromalox P/N:TMO-30315E2T2,
Dual pumps driven by Baldor 3 HP 480V Motors, Spec:06H01X47, Frame:182T.    **SOLD**

CLO703 -Skid-mounted Lubrication System - Integral skid-mounted lubrication system with duplex pumps and filtration and plate/frame heat exchanger.
Filtration: Duplex Flex Line filters, rated for 150 psi at 450F, S/N:11990, Model:FL141VE1921513,
Heat Exchanger: ITT Plate Flow Heat Exchanger Model:PF21, S/N:92X50499-01, P/N:5-626-21-035-004,
Dual pumps driven by Baldor 10 HP 480V Motors, 1-1/2" Inlet/outlet piping.    **SOLD**

CLO705 -Skid-mounted Hydraulic System. Integral skid-mounted hydraulic unit with 3 piston-style accumulators and 7.5 HP pump,
Accumulators:3 - 10 gallon Tobul piston accumulators, Model #9A30-80.    **SOLD**

CLO706 -Skid-mounted Lubrication System. Integral skid-mounted lubrication system with duplex pumps and filtration and plate/frame heat exchanger.
Filtration: Duplex Flex Line filters, rated for 150 psi at 450F, S/N:11992 and 11993, Model:FL081VE1921516,
Heat Exchanger: ITT Plate Flow Heat Exchanger, Model:PF21, S/N:92X50499-03, P/N:5-626-21-015-003,
Dual pumps driven by Baldor 5 HP 480V Motors, 1-1/2" Inlet/outlet piping.    **SOLD**

VTO-03 - MEGATOR WATER FILTER, FIBERGLASS CONSTRUCTION, M/N 97395, TYPE 2A, S/N M235, UNUSED OUTSIDE STORAGE

CCBG-857X & 858X – Skid mounted ENVIREX activated carbon filter & anthracite 100 gpm filter system. CCBG-857X - 1900 gal., 84 in. dia. X 4 ft – 9 in.  T/T, 100 psi at 650 deg. F, vertical, O.A.H./ nozzles 9 ft., dished heads both ends, carbon steel, 36 in. anthracite bed, N.B., code,      4 in. inlet & outlet, 8 in. flush out, 20 in. top manway. CCBG-858X - 1650 gal., 60 in. dia. X 9 ft – 9 in.  T/T, 100 psi at 650 deg. F, vertical, O.A.H./ nozzles 13 ft – 1 in., dished heads both ends, carbon steel, 60 in. activated carbon bed, N.B., code, 3 in. inlet & outlet, 8 in. flush out, 20 in. top manway. Skid dimensions 8 ft W X 16 ft L X 14 ft H, 14,000 lbs. JPG photo available. **SOLD**

CLO708 -2500 Input HP Lufkin Gearbox with 40 HP pony motor, 122 gallon sump. Gearbox: Input:2500 HP, Gear Ratio:3.93:1, Unit Rating:3750 HP, Application Factor:1.5, Model:SF2413-14.252, Serial No:9663. 

PRC-51G-0003 - CUMMINGS/ ONAN EMERGENCY STANDBY GENERATOR - RS1200, M/N 12.5JC-3CR, NATURAL GAS FUEL, VOLTS 120/240, 1 PH, 60 Hz, 45 AMP @ 1800 RPM, 12 KW OUTPUT, AIR COOLED, ENGINE: REMOTE START, TRANSFER SWITCH M/N ATVEC60-3/1212B, SIZE 56" L x 28" W x 38 ¾" H, STILL INSTALLED AT SITE, LIKE NEW CONDITION. 

PRC-51G-0002 - CUMMINGS/ ONAN EMERGENCY STANDBY GENERATOR, M/N 100 ENBA, S/N J920488899, NATURAL GAS FUEL, VOLTS 277/480/, 3 PH, 60 Hz, 150 AMP @ 1800 RPM, 100 KW OUTPUT, AIR COOLED, ENGINE: REMOTE START, TRANSFER SWITCH M/N OTCU-150G, S/N J920489022, STILL INSTALLED AT SITE. 

MDCLO763 - Trane Heat Exchanger, all Aluminum, NATL BD 151417, P.O. 5253-01-C22-102, Item C155F. Process stream "A1" Working pressure 600 psig, Pneumatic test pressure 900psig, Hydro test press 1080psig. Process stream "E,L" Working pressure 600psig, Pneumatic test pressure 900psig, Hydro test 1080psig. Process stream "F" Working pressure 150psig, Pneumatic test pressure 225psig, Hydro test pressure 300psig. Process stream "G" Working pressure 275psig, Pneumatic test pressure 415psig, Hydro test pressure 550psig. Working temperature (degrees F) 150 maximum, -450 minimum. Manufacturer serial number 13-3702-1 Year built 1978. -Condition USED-  Photos Folder\CLO.C155F1.JPG  **SOLD**

MDCLO750 - QTY. (2) Trane Heat Exchanger, all Aluminum, NATL BD 151416, P.O. 5253-01-C22-102, Item C155 D and E. Process stream "A1" Working pressure 600 psig, Pneumatic test pressure 900psig, Hydro test press 1080psig. Process stream "M" Working pressure 150psig, Pneumatic test pressure 225psig, Hydro test 300psig. Process stream "N" Working pressure 600psig, Pneumatic test pressure 900psig, Hydro test pressure 900psig. Working temperature (degrees F) 150 maximum, -450 minimum. Manufacturer serial number 13-5384-1 Year built 1978. -Condition USED-  Photos Folder\CLO.C155D-E1.JPG **SOLD**

CLO-C-154A - Altec Internation all Aluminum multi stream heat exchanger, plate - fin - rectangular configuration, effective surface areas A= 2390 ft2, B= 838 ft2, C= 1198 ft2, 1 core, design 360/300/300 psig @ +150/-320 deg.F, Three sections A/B/C, vertical design, NB# 2178, Mfg.d 1994, connections "A" in & out 3.5" - "B/C" in 4.5" - "B/C" out 8.625", used condition. **SOLD**

APC-Qty (3) Tranter plate and frame heat exchanger, 72.7 ft2, 150 psig, 250oF, 20 plates, Dimin water service, 316 stainless plates, 316L nozzles, performance data Dimin water: 228 GPM, 128oF inlet, 113oF outlet, 16.6 psi pressure drop, 9 x 1 plate arrangement - water side:  228 GPM, 90oF inlet, 105oF outlet, 14.5 psi pressure drop, 10 x 1 plate arrangement, 4" nozzle sizes, weight 1335 lbs., vert. config., 26 7/8" W x 59 3/4 H x 20 1/4" DP, code.  **SOLD**

APC-Qty (2) Tranter plate and frame heat exchanger, 104.8 ft2, 150 psig at 250oF, 33 plates, 316 stainless plates, 316L nozzles, performance data pellet water:  401 gpm, 140oF inlet, 120oF outlet, 7.59 psi press. Drop, 16 x 1 plate arrangement, tower water:  513 GPM, 90oF inlet, 105oF outlet, 12.78 psi press. drop, 16 x 1 plate arrangement, 4" nozzle size, weight 1,658 lbs., vert. config., 26 7/8" W x 59 3/4 H x 51 9/16 DP with stand, Supercharger Mod. III, Model S-3-UP-33. **SOLD**

CXO-E-94151 - 425 ft2 oil chiller, 180 psi at 250 deg F shell, 150 psi at 250 deg F tubes, carbon steel shell and tube, type multi-tube hairpin, size 10-192 SSMT, (1) pass shell and tube, (68) tubes ¾” dia x 0.083 wall x 16 ft long, weight 4070 lbs.

CPO-27E1 - 585 ft2, shell 110 psi at 650 deg. F, tubes 170 psi at 430 deg. F, C.S. shell and tube, type AJU, size 15" x 20', horiz., shell divided flow, tubes 2 pass, 3/4" dia. Tubes, 4,300 lbs weight

CPO-26E2-1&2 - Qty. (2) 1846 ft2 each, shell 815 psi at 840 deg. F, tubes 700 psi at 890 deg. F, C-1/2MO shell and tubes, type CET, size 30 x 240, horiz., 1 pass shell and tube, 3/4" dia tubes, 23,600 lbs. weight

CPO-26E2-3 - 1846 ft2, shell 815 psi at 500 deg. F, tubes 600 psi at 580 deg. F, carbon steel shell and tube, type CET, size 30 x 240, horiz., 1 pass shell and tube, 3/4" dia tubes, 25,900 lbs weight

CPO-25E10 - 2,560 ft2, shell 485 psi at 600 deg. F, tubes 75 psi at 500 deg. F, carbon steel shell and tubes, type BEM, size 48 x 8 x 2560, vertical, 1 pass shell and tubes, 3/4" dia tubes

CPO-26E4 - 2,740 ft2, shell 650 psi at 450 deg. F, tubes 90 psi at 650 deg. F, carbon steel shell and tubes, type 16 x 34 x 62H, size 30 x 288, horiz., 1 cross flow shell pass, 4 pass tubes, 3/4" dia tubes, 21,000 lbs weight

CLO-C-182 - 2,824 FT2, SHELL 110 PSI @ -50/100 DEG. F, TUBES 575 PSI @ -50/100 DEG F, CARBON STEEL SHELL & TUBE, TYPE BJM, SIZE 37-6-240, HORIZONTAL, SPLIT FLOW SHELL SIDE, 2 PASS TUBE SIDE, ¾" DIA TUBES, APPROX 24,700 LBS WEIGHT

CPO-26E1 - 2830 ft2, shell 800 psi at 1078 deg. F, tubes 700 psi at 1150 deg. F, type 321 stainless shell and tubes, type 10-51-642H, size 33 x 228, horiz., shell 1 pass cross flow and tubes 1 pass, 3/4" dia tubes, 27,340 lbs weight

CSJ-TT-220/220A Qty (2) After Cooler - 3,865 ft2, 50 psi at 450oF shell, 125 psi at 150oF tubes, type CEN, size 25 x 192, 3/4" dia low fin tubes, 2 pass, shell expansion joint, horiz., 1971 construction, 9200 lbs weight

CLO-C-123 - 4,364 FT2, SHELL 75 PSI @ -150/100 DEG F, TUBES 575 PSI @ -150/100 DEG F, SA203 TO SA300 (3 ½ Ni) SHELL & TUBE, TYPE BJM, SIZE 42-4423-30, HORIZONTAL, SPLIT FLOW SHELL SIDE, 3 PASS TUBE SIDE, ¾" DIA TUBES, APPROX 38,200 LBS WEIGHT

CXO-E-94360 A&B - Qty (2) – 5,707 ft2 each, 236 psi at 250 deg F shell, 125 psi at 170 deg F tubes, carbon steel shell and tubes, type AEU, size 41-240, (1) pass shell, (4) pass tubes, horizontal with saddles, weight 32,000 lbs.

CPCOR-E-711-   6342 ft2, 200/ 323 psi at 350 deg. F shell, 150/ 225 psi at 350 deg. F tubes, carbon steel shell & tubes, Type NJN, size 37 X 360, divided flow shell side, 1 pass tube side, approx. weight 34,000 lbs.

CXO-E-94441 - 8,279 ft2 condenser, FV/75 psi at 395 deg F shell, FV/125 psi at 170 deg F tubes, carbon steel shell and tubes, type AEU, size 47-336, (1) pass shell, (4) pass tubes, horizontal with saddles, weight 49,100 lbs.

CPO-25E9 - 9,120 ft2, shell and tubes 75 psi at 500 deg. F, carbon steel shell and tubes, type BEM, size 65 x 12 x 9120, vertical, 1 pass shell and tubes, 3/4" dia tubes

CPCB6 - FISHER-KLOSTERMAN XQ-465-12 CYCLONE, #7 GAUGE TYPE 316 STAINLESS STEEL, HARD CHROME PLATED INTERIOR, C.W. ROTATION, ATMOSPHERIC PRESS., AMBIENT TEMP., 300 LBS W/O STAND, 10" DIA. CYCLONE & FEED, 6 3/8 DIA. BOTTOM FLG., 78" O.A.H.

CPCB7 - QTY (2) LOSS IN WEIGHT FEEDER, SINGLE SCREW, DESIGN: PPS FEED, 12 FT3 CAPACITY, STAINLESS STEEL CONTRACT PARTS, 360-1200 LBS/HR FEED RATE, DENSITY 30 LB/FT3 NOM. -22 LBS/FT3 AERATED, 1/2 H.P. DRIVER, ON BASE PLATE & STAND, FLAT BOLTED TOP, CONE BOTTOM.

CPCB8 - QTY (2) ADDITIVE SURGE HOPPER - 30" DIA. X 16" T/T HOPPER SECTION, 22" DEEP CONE BOTTOM 60 DEGREE, ALUMINUM CONSTRUCTION, 10" COVER INLET, 4" BOTTOM CONE OUTLET, 44" O.A.H & 7'-7" O.A.H. WITH METAL STAND.

CPCB9 - ADDITIVE SURGE HOPPER - 30" DIA. X 18" W/ CONE BOTTOM, 6 FT3 CAPACITY, 304 TYPE STAINLESS STEEL, ATMOSPHERIC DESIGN.

LPO-PS1-L505 Extruder L504 JSW mdl. CIM400 continuous intensive mixer with 3000 hp @ 1200 rpm; mixer feeds L505 JSW extruder model P380-10SW 14.9" dia screw, 800 hp @ 1200 rpm motor; system includes mixer feed hopper, fly knife under water pelletizer; max line capacity is 30,000 lbs./hr Japan Steel Works **SOLD**

LPO-LCL970 Extruder L969 Farrel Model 9CM continuous intensive mixer with 1500 HP motor; mixer feeds L970 Farrel 15" dia screw extruder with 700 HP motor; system includes feed hopper; missing fly knife underwater pelletizer; max line capacity 7,500 lbs./hr Farrel

LPO-L-941 A & B, (2) Two, Farrel 9CM Continuous Mixers; Driver General Electric 1250 HP Induction Motor, FR-83095, Type-K, 60Hz, RPM-1780, w/ Eaton Dynamatic Oiler, Farrel Gear Reducer S/N-67A40721.

LPO-L-822 (1) One, Farrel Model 9CM Continuous Intensive Mixer, (NOTE: Driver not included)

LPO-L-504 (1), Japan Steel Works Gear Reducer Type SRS 86-RHP, Reduction Ratio-1: 3.46 / 1:3.72, Mfg. # 2-758043, Mfg. 1976 (NOTE: Gear Reducer Only)

LPO-L-505 (1), Japan Steel Works Gear Reducer (specs unknown at this time)

LPO-PS2-L822 Mixer L822 Farrel Model 9CM continuous intensive mixer.

APC-Additives mixer - Sprout Waldron model DA-40-10 continuous duty double agitator, 304 stainless construction, ASME code 100 psig cooling jackets (2), gas tight construction, (2) 20 HP, TEFC-XT, driver 230/3/60, 1140 RPM input, 280-56 RPM output variable speed, skid mounted, 27,562 lbs./hr through put, 18.7-37.5 lbs./ft3 density, 40" of H2O pressure at max 248oF, 46 3/8" W x 33" H x 10 ft L mixing box, 18" center to center agitators. **SOLD**

LPO-PS1-L505 Extruder L504 JSW mdl. CIM400 continuous intensive mixer with 3000 hp @ 1200 rpm; mixer feeds L505 JSW extruder model P380-10SW 14.9" dia screw, 800 hp @ 1200 rpm motor; system includes mixer feed hopper, fly knife under water pelletizer; max line capacity is 30,000 lbs./hr Japan Steel Works **SOLD**

CXOTB-1-QTY (2) SAFE-T-NET TYPE 210, GAS MONITOR, WITH GASTECH SAMPLE DRAWING SYSTEM FO COMBUSTIBLE GAS, WITH  GASTECH SAMPLE DRAWING SYSTEM FOR OXYGEN IN ENCLOSED CABINET **SOLD**

CXOTB-3- TB100106 - ASTRO ZELLWEGER ANALYTICS, INC., SMART TOC 1900C TOTAL ORGANIC CARBON ANALYZER **SOLD**

CXOTB-5- TB10077 -  BARNSTEAD RO-PURE INFINITY REVERSE OSMOSIS WATER SYSTEM **SOLD**

CPO 1 - CHAMPION DISHWASHER, M/N 20KPRB, S/N 68772, VOLTS 480, AMP 19, PH 3, HZ 60, STAINLESS STEEL, SHELCON CONTROL, S/N 3295-916-82, M/N STC-25, WITH CONVEYOR FROM DROP-OFF TO WASHER, SALVAJOR DISPOSER BY SHELCON INC., M/N 200, VOLTS 208/230/460, HP 2.0, PH 3, 60 HZ, WITH STAINLESS SINK AND COUNTER

CPO 2 - SALAD BAR WITH HEAT CONTROL STAINLESS

CPO 3 - SALVAJOR DISPOSER BY SHELCON, M/N 200, S/N 29284, HP 2.0, VOLTS 208/230/460, WITH STAINLESS SINK AND COUNTER TOP

CPO 6 - GROEN, S/N 117651, M/N D2-30, NBD #117651

CPO 10 -SHARP COMMERCIAL MICROWAVE OVEN, R-23AP

CPO 25 -UTILITY FOOD WARMER, STAINLESS

CPO 26 -MOVITRON EXHAUST HOOD ASSEMBLY FOR GREASE EXTRACTOR, M/N LS, S/N 1011-1282, STAINLESS, WITH FIRE SPRAY NOZZLE ASSEMBLY

CPO 27 -WELLS DEEP FRYER AND GRILL, STAINLESS

CPO 29 -CHATILLON SCALE, 100 LBS. X 202, M/N BP15-100T, TYPE 15

CPO 31 -BUNN INDUSTRIAL COFFEE MAKER, M/N CL-15, S.S.

CPO 35 -STAINLESS CASHIER STATION

CPO 36 -10' STAINLESS CONDIMENT COUNTER SERVER

TB1003 - THERMTECH SKID MOUNTED THERMAL OXIDATION UNIT, 240V/3PH/60 Hz, S/N 8600396, FLA 8.5 AMPS, 1 HP BLOWER MOTOR DRIVER. 

CXO-001- Environmental Instruments Packaged Thermal/Catalytic Oxidizer System, 18 ft trailer mounted, 1898 hours run time, Model EI 2000, S/N 00159, soil vapor extraction and treatment system, fully automated, rotary Sutorbilt Model 8L, PD extraction blower pulls contaminated vapor from hydrocarbon impacted soil and destroys contamination in a direct fired thermal oxidizer, 2000 SCFM vapor flow with 10,000 PPMV, system by Stealth Industries, Specifications as follows:

Flow Rate: 2400 CFM max. flow rate - 2" Hg. vac.
Flow Rate: 2050 CFM at 12" Hg. vac.
Efficiency: 99.9% at 10,000 PPMV voc
Operating temperature: 1400-1500 degrees F
Dimensions: 216" L x 75" W x 120" H
Blower: 75 BHP, 66.8 BHP at 2050 and 12", 11.5 BHP at 2300 and 2"
Burner rating: 3,000,000 BTU/hour
Fuel: natural gas or propane
Noise level: 68.80 dB at 10 feet
Weight: 18,000 lbs. - unit, stack and pipe spools, 4,000 lbs. pipe/stack, total  22,000 lbs.
Built: in 1995, reconditioned and upgraded in 1999
Hours in Operation: 1898
General condition:  Reconditioned in 1999 

Power: 230 Volt, single phase
Blower: (Max. Operating Conditions) 3600 RPM, 15" Hg, 225E F temperature rise, and 10 hp motor runs blower
Flow Rate: 300 CFM
Flow Rate:  226 ICFM at 4" Hg at 14.65 PSIA
Efficiency: 99% (Direct Fired), >97% (Catalytic)
Operating Temperature: 1400E F (Direct Fired), 700E F (Catalytic)
Dimensions: 133" L x 84" W x 60" H (exhaust stack 176")
Burner Rating: 750,000 BTU/hr
Catalyst: Monolithic Catalytic Module
Fuel: Natural Gas or Propane
Blower Noise Level: 75.2 dBa at approximately 3 feet
Weight: 4,700 lbs.
Hours in Operation: 13,054.2
General Condition: Working condition, could use some paint

LPO - Field Flare Unit and Knockout Drum, Flare tip - Callidus Model # BTZ-US-18 FLARE TIP, S/N F-7749, Tech. ID# W788, 54" dia. base to 36" dia. to 24" dia. X 100 ft high, guide wire construction, ladder, 18" dia. flare tip

CLO704 -Farrel Underwater Pelletizer, S/N:926002, Designed for 25M lbs/hr HDPE Polymer Pelletizing, 6" Inlet/ 8" Outlet pellet water piping
Hydraulic clamps, 16 blade hub, manual blade adjustment, 75 HP - 890 RPM - 460V - 3Ph - GE Severe Continuous Duty motor, Model: 5KAF444SS401P, P/N:NH6041016, Frame: 444TZ, Type:KAF, 2 HP Ventilation Fan.

CSJ-PP-220 A/S Qty (2) Durco - Mark II GR II, 3 x 2S-10, 20 gpm, SP 16.7/27.7 psi, DP 69.9/82.9 psi, DI case - 316 SS impeller, AC 25 HP driver - 3500 RPM, 460.3.60 **SOLD**

CSJ-PP-254 A/S Qty (2) Durco - Mark II GR I, 1 1/2 x 1-6, 10 gpm, SP 7.4/20.6 psi, DP 44.6/50.5 psi, DI, West. 5 HP driver, 3490 RPM, 460.3.60 **SOLD**

CSJ-PP-321 A/S Qty (2) Durco - 4 x 3 - 10/61, 198 gpm, SP 14.7/54.5 psi, DP 55.2/95 psi, DI case - 316 SS impeller, AC 20 HP driver - 3550 RPM, 460/3/60 **SOLD**

CPO-26P4-1&2 - Pacific multi-stage pump set, size 1 1/2", type JTCMB, 8 stages, 67 GPM design, 90 GPM, discharge 630 psig, suction 5 psig design 3 psig, diff head 1704 ft, 10 N.P.S.H., 1 1/2 x 3, driver 75 HP, 3600 RPM, 445US frame, TEFC, 440/3/60, total pump/motor/base - 3,700 lbs.

CPO-26P6-1&2 - Pacific single-stage pump set, size 1 1/4" L, type SVCMB, 87 GPM design 109 GPM, discharge 695 psig, suction 615 psig design 563 psig, diff head 345 ft, 8 N.P.S.H., driver 25 HP, 3600 RPM, TEFC, 440/3/60, total pump/motor/base 1,555 lbs.

TCO - QTY (1) WESTINGHOUSE 15 HP MOTOR FRAME 324U, M/N ABDP, 3 PH, 60 Hz, 1160 Hz, 440 VOLT, SKID MOUNTED WITH OIL GEAR WACH GAUGE SYSTEM, OIL GEAR, M/N VW34LS4YCN, S/N 89034988  **SOLD**

TB100121 - TRAVAINI SKID MOUNTED VACUUM PUMP, TYPE TRME 100-12601C1, S/N K4130, MFG'D 1996, M/N TRO 750 H-1A-XP, 50 HP RELIANCE, MOTOR DRIVER, FRAME 32GT, 1765 RPM, TYPE B, TEFC. 

TB100124 - TRAVAINI SKID MOUNTED VACUUM PUMP, M/N TRO 100 H-1A, S/N 2407-96, 7.5 HP MOTOR DRIVER.  **SOLD**

TB-MW10VP - TRAVAINI VACUUM PUMP, M/N TRT00SCH-1A, S/N J2189, TYPE DYNASEAL 5 HP, B/M, S/N 2724-96, PUMP TYPE TRHE 32-601C1RZ, EX-D, S/N 69622, YEAR 2001

CPO-26R1 & R2 - Reactors - 72" I.D. outside wall x 60" I.D. inside wall x 7'-4" T/T, 16'-3" O.A.H., FV/742 psi at 900 deg. F, 5" thk VS-L50 castable between inner and outside wall, 2 1/4" thk outer wall, shell and heads SA387-GR C, Incoloy 800 internals, 1" thk KS-4V castable inner lined over #14 ga. HEX 304 SS

CPO-26R3 - Reactor - 84" I.D. outside wall x 72" I.D. inside wall x 10'-9" in T/T, 20'-8" O.A.H., FV/720 psi at 900 deg. F, 5" thk VS-L50 castable between inner and outside wall, 2 1/4" thk outer wall, shell and heads SA387-GR. C, Incoloy 800 internals, 1" thk KS-4V castable inner lining over #14 ga. HEX 304 SS

LPO- 001 - GAS PHASE REACTOR VESSEL – 12 FT. DIA. x 61 FT. – 2 3/8 “ T/T  PLUS  22 FT. – 6 IN. CONE TRANSITION TO 20 FT. – 6 IN. DIA.  TOP HEMISPHERICAL HEAD, 100 FT. – 4 7/8 IN O.A.H., DESIGN 655 PSIG AT 300° F, CODE, N.B.,  SA-516-70 CARBON STEEL, BOTTOM ELLIP. HEAD,  BOTTOM INTERNAL MOUNTED DISTRIBUTION PLATE (APPROX. 5 TONS), TOTAL APPROX. VESSEL ASSEMBLY WEIGHT 370 TONS. JPG PHOTOS AVAILABLE FOR THIS EQUIPMENT

                                                                        MAT'L    MAT'L
ITEM #                        DESCRIPTION    GAL    PSI     DIA     LENGTH     PRES     SHELL    JKT         MFG'R

LPO - LABV827A       Particle-form        5024    730     20"      348'             125     SA-106C  SA-106B

LPO - LABV827B        Particle-form       5024    730     20"      348'             125     SA-106C  SA-106B

LPO - LEFV1000A      Particle-form       5024    730     20"      348'             125      SA-106C  SA-106B    Southwest Fab & Weld

LPO - LCDV875C       Particle-form        5024    730     20"      348'             125      SA-106C  SA-106B

LPO - LCDV875D       Particle-form        5024    730     20"       348'             125     SA-106C  SA-106B

LPO - S2V631             Polyethylene     11000   750     24"      242'              140     SA-106C     CS         GLITSCH

LPO - S1V1534           Polyethylene     15000    800     24"      343'             140     SA-106C     CS         WELFAB

LPO - GPR1                Polyethylene     10300   655    144 x 246 100'           NA     SA-516-70   NA         CBI

LPO - V1000B             Particle-form       5024   730     20"       348'             125     SA-106C   SA-106B    S.W. Fab & Weld

LPO - V650                 ISOM                           250     48"        12'              250

CSJ-GY-210 Separator - 20" dia x 52" O.A.L., horiz., 150 psi at 500oF, carbon steel shell, 304 SS internals, 16" O.D. flg. Inlet, 10" - 150# flg. Outlet **SOLD**

CSJ-GY-221 Separator - Wessels - 10" type RT moisture, 64" O.A.H., 10" inlet & outlet, carbon steel shell with stainless diffuser **SOLD**

CSJ-PE-292 Graham 3-Stage Ejector System, M/N 90A-14 x 14 - 2213 - 12 x 8 - 66 - 8 x 8, 315# 1 hr fluid - 180# 1 hr air - 135# 1 hr HC, Sp 15 mm, DP 800 mm, with after cooler **SOLD**

LH1 - LANWRAP SHRINK WRAP MACHINE, 4' x 4' PLATFORM, (5) - 5' SECTION CONVEYOR, VOLTS 460, 215687 CYCLES.    **SOLD**

- WITTE CO. VIBRATING SEPARATOR, MODEL 200-S, 16 IN WIDE X 24 IN LONG, S/N 3139, 1 1/2 DEG TILT FROM INLET TO DISCHARGE, PERFORATED DECK 1/4" DIA HOLES, SIZED FOR 1/8 " PELLETS, 5" X 10" LOAD AREA OPENING, 5" DIA. DISCHARGE, 2" X 6" CHUTE, APPROX. 19" W X 61" L X 3' H WITH BASE.    

CPCB2 - PELLET BLENDER, 650 FT3, 6FT-6 IN O.D. X 19 FT 6 IN T/T, 1.5 PSIG AT 130 DEG. F, 0.190 THK- TYPE 5052 ALUM., FLAT HEAD 0.25 THK TYPE 6061, DESIGN BULK DENSITY 30 LBS/FT3, 28 FT - 10 IN O.A.H INCLUDING CONE BOTTOM AND NOZZLE TRANSITION, (6) 5 9/16 IN DIA. BLEND TUBES 22 FT- 1 15/16 IN LONG. 

CPCB3 - QTY. (2) - PELLET BLENDER, 2000 FT3, 9FT-6 IN O.D. X 28 FT 6 IN T/T, 1.5 PSIG AT 130 DEG. F, 0.190 THK- TYPE 5052 ALUM., FLAT HEAD 0.25 THK TYPE 6061, DESIGN BULK DENSITY 30 LBS/FT3, 28 FT - 10 IN O.A.H INCLUDING CONE BOTTOM AND NOZZLE TRANSITION, (8) BLEND TUBES.

CPCB4 - PELLET BLENDER, 2500 FT3, 10FT-0 IN O.D. X 20 FT 0 IN T/T, 1.5 PSIG AT 130 DEG. F, 0.190 THK- TYPE 5052 ALUM., FLAT HEAD 0.25 THK TYPE 6061, DESIGN BULK DENSITY 30 LBS/FT3, 32 FT - 10-1/2 IN O.A.H INCLUDING CONE BOTTOM AND NOZZLE TRANSITION, (8) BLEND TUBES.

PRC-59-BN-9507/9509/9511 - QTY (3) POWDER STORAGE SILOS, 5052-H32 ALUMINUM CONSTRUCTION, 96" DIA x 19' T/T, VERTICAL, 1000 FT3 CAPACITY, DESIGN PRESS. 1 PSIG & 0.5 PSI VAC. AT 150 DEGREES F, DESIGNED ROOF AND WIND LOADS, 26' - 5" O.A.L. SILO TO 10" BOTTOM OUTLET, 60 DEGREES CONE BOTTOM, 31' - 10" O.A.H. WITH LEGS, 2,952 LBS. EMPTY WEIGHT (SILO ONLY); EACH SILO EQUIPPED WITH STAINLESS STEEL CONSTRUCTION SMOOT CO. BIN VENT FILTER, 65 FT2 CAPACITY, M/N 58BV9, AND SMOOT CO. M/N FT9 ROTARY VALVE, SILOS STILL INSTALLED AT SITE. 

TCO -DR1478 -  QTY (12)  ALUMINUM STORAGE SILOS - 12' DIA x 35' T/T x 45' OAH, 60 DEGREE CONE BOTTOM TO 12" DIA OUTLET, FLAT ROOF, ¼" THK ALUMINUM SHELL, TOP NOZZLES - 20" MANWAY, (1) 14" SUPPORTED NOZZLE, (2) 12" DIA, (2) 3" DIA AND (1) 3" AERATION NOZZLE ON BOTTOM CONE SECTION, EST 7,000 LBS. WEIGHT EACH

DCO.1 Qty. (60) Item V-901/ V-907 - 2000 ft3 Aluminum Storage Silos - 11 ft. dia. X 19 ft. T/T X 28 ft. O.A.H. with 7 ft.- 8-3/4 in. 60 deg. cone bottom to 10 in. flanged outlet, ¼ in. alum. plate construction, pier mounted 1 psig internal pressure and 0.5 psig external pressure at 150 deg. F, approx. 4,900 lbs. total weight.

DCO.2 Qty. (24) Item V-905 - 4000 ft3 Aluminum Storage Silos - 12 ft.- 8 in. dia. X 28 ft. T/T X 38 ft. O.A.H. with 9 ft.- 11-1/16 in. 60 deg. cone bottom to 10 in. flanged outlet, ¼ in. alum. plate construction, pier mounted 1 psig internal pressure and 0.5 psig external pressure at 150 deg. F, approx. 6,800 lbs. total weight.

DCO.3 Qty. (56) Item V-560 - 5000 ft3 Aluminum Storage Silos - 12 ft. dia. X 43 ft. T/T X 42 ft.-10 in. O.A.H. with 9 ft.-10 in. 60 deg. cone bottom to 12 in. flanged outlet, 5/16 in. thk. lower and ¼ in. upper alum. plate construction, pier mounted 1 psig internal pressure and 0.5 psig external pressure at 150 deg. F, approx. 10,000 lbs. total weight.

DCO.4 Qty. (3) 5000 ft3 Blending Type Aluminum Storage Silos - 12 ft. dia. X 40 ft. T/T X 53 ft. - 7-5/16 in. O.A.H., approx. 16,600 lbs. total weight.

NOTE: Top mounted bag house filtering systems, air locks and conveying piping also available for DCO.1.2.3.4

LPO-S2V670 Silo 3500 cu ft; aluminum product silo; (10) each; 12'6" ID x 28' T/T with 10'6" cone; 1/4" wall thickness; with internal center blend tube (V670 1-10) ALLIED INDUSTRIES

LPO-S2V663 Silo 1000 cu ft aluminum mix feed silo; 10' ID x 10' T/T with 8'6" cone; 1/4" wall thickness ALLIED INDUSTRIES

LPO-S2V666 Silo 25 cu ft aluminum product silo; 2'6" ID x 4' T/T with 2'5" cone; 1/4" wall thickness WALKUP CO

LPO-S2V668 Silo 3500 cu ft aluminum powder silo; 12'6" ID x 28' T/T with 10'6" cone; 1/4" wall thickness ALLIED INDUSTRIES

LPO-LV922-1,2 Silo 1750 cu ft alum storage silo 11' dia by 19' str side - 7'8" 60 deg cone; 14" bottom outlet, lug mounted

LPO-LV905A&B Silo 1750 cu ft aluminum storage silo 11' dia by 19' str side - 7'8" 60 deg cone; 14" bottom outlet, lug mounted

LPO-LV921-1,2,3 Silo 1750 cu ft alum storage silo 11' dia by 19' str side - 7'8" 60 deg cone; 14" bottom outlet, lug mounted

LPO-LV910-1,2,3 Silo 1750 cu ft alum storage silo 11' dia by 19' str side - 7'8" 60 deg cone; 14" bottom outlet, lug mounted

LPO-S1V1529A-K Silo 6000 cu ft aluminum product silos; (11) each; 14' 6" dia x 34' T/T plus 13' cone bottom; 200,000 lb. capacity SEMCO

LPO-AB2V3560XX Silo 5000 cu ft alum storage silo 12' dia by 43', 60 deg cone; there are at least 10 each available

LPO-LV911 Silo 3500 cu ft alum storage silo 12' 8" dia by 28' str side - 9'2" 60 deg cone; 14" bottom outlet, lug mounted

LPO-LV909-1-24 Silo 3500 cu ft alum storage silo 12'8" dia by 28' str side - 9'2" 60 deg cone; 14" bottom outlet, lug mounted

LPO-LV904AB1&2 Silo 1750 cu ft alum storage silo 11' dia by 19' str side - 7'8" 60 deg cone; 14" bottom outlet, lug mounted

APC-B200 - Qty. (5) Powder homogenization silos Buhler Miag 35,000 ft3, 30 ft. I.D. X 50 T/T X 66 ft base to roof  X  approx. 68 ft O.A.H. 9 ft-8 in base to bottom outlet nozzel under skirt section, slant roof 3-3/8 in to 12 in, 20 deg. slope cone bottom, (1) external compression ring, (2) external stiffener rings, design pressures - 40 ft of produce at 37.5 lbs/ft3 plus 40 ft H20, shell 1.47 psi roof to shell, 14.7 psi cone to shell & 14.7 psi bottom cone, 8 in H20 vacuum, des. temp 248 deg. F, carbon steel construction, good condition, painted external, dwgs. and photo available. 

APC-B235 - Premix stabilizer silo - 1413 ft3 capacity, 120" dia x 15 ft S/S x 27 ft 2" O.A.H. to bottom of air lock, 8 ft - 9 1/4" length cone bottom, 30o cone bottom, 13 3/4" x 9 7/8" bottom outlet, carbon steel construction with PLASITE # 7122 coating, ring support vert., 10,000 lbs. weight, 54" dia type 100 CT-30 filter unit mounted on top head (B233), O.A.H. with filter assembly 38 ft - 9 1/4 in.  Unit designed for 40 lb/ft3, storage capacity 32,648 lbs.,  cone section equipped with bin vibration system - Syntron electric model V-50 units.

APC-C200.1 - Powder bin - 2150 ft3 capacity, 14' dia x 10' S/S x 21' O.A.H., vert., 11' high 30o cone bottom, 24" bottom discharge to "Y" to (2) 12" discharge nozzles, flat top with 16" x 14 1/2" inlet, fill rate 35,280 lbs./hr, 67,000 lbs storage -density 31.2 lbs./ft3, design pressure 3/4 psig at 248oF, carbon steel, 5/16" thick wall, 16,000 lbs. weight.

APC-C200 - Qty. (2) - Powder bin - 1,694 ft3 capacity, 10 ft dia x 18 ft S.S x 28 ft O.A.H., vertical, 9' - 11' high 65 cone bottom, 12" bottom discharge, slant roof 3 to 12, 16" top inlet, design 1 psig at 250oF, 1/4" aluminum 5052-H112 shell and cone and 5/16" aluminum roof, 3,984 lbs. weight.

APC-C238 - Qty (4) pellet bin, 3500 gal capacity, 90" dia x 10 ft S/FF x 14 ft 8 in O.A.H. top flange to bottom flange, 40 1/16" lg cone bottom, 45oF cone, 8" dia bottom outlet and top inlet, 3/16" thk 304 stainless steel construction, ring support, 5263 lbs weight.

APC-Qty (2) high pressure HDPE pellet vessels, 35,280 lbs./hr throughput, 35 lbs/ft3 density, pellet size 0.78-0.098 in dia - 0.678-0.118 in long, 185oF max, 304 stainless steel construction, 48" dia x 108 1/2" O.A.H. from top inlet to bottom stand support, dish head, cone bottom, 17" straight side, side 12" x 16" manway, 5" bottom discharge, 8" top inlet, vent sock filter, automatic butterfly valve controlled.

MDCHO598 - 1,600 GAL. CAPACITY STAINLESS STEEL TANK, 55” DIA x 13’–2” T/T, ATMOSPHERIC PRESSURE, DISHED HEADS BOTH ENDS, HORIZONTAL, (2) 3” TOP NOZZLES, (1) 3” BOTTOM OUTLET, MOUNTED ON TRAILER WITH MILITARY HITCH, PRIOR SERVICE – FIRE FIGHTING FOAM.

CXO.TB-001 - 5,000 GAL FIBERGLASS TANK, 96" DIA x 14' T/T, ATMOSPHERIC & VACUUM AT 180 DEGREES F, DOW 411 MATERIALS OF CONSTRUCTION, INTERFACE SURFACE REINFORCEMENT 10 MC-VEIL-ASTM 3299, 3" INLETS, 30" MANWAY, PALMER OF TEXAS - 1991- S/N AP-13284. **SOLD**

CXO.TB-T-3 - 7,500 GAL CAPACITY, 96” x 20’ T/T, C.S., ATMOSPHERIC PRESSURE AT 100 DEGREES F, MDMT-20 AT ATM, VERTICAL, 30’ MANWAY, GULF COAST ALLOY 19912 – S/N 1907-700. OPTIONAL PUMPS: (2) PUMP MOTOR SETS; MOTOR:  RELIANCE XT, 20 HP, FRAME 256T, TYPE F, DESIGN B, 3500 RPM, 460 V, 60 Hz, 3 PHASE WITH DURCO PUMP: SIZE 1 x 3 x 1.5-82 RV-DCI, S/N 410423 WH & (1) PUMP/MOTOR SET:  MOTOR:  RELIANCE XT, 40 HP, 3545 RPM, TYPE P, DESIGN BB, 460 V, 3 PH, 60 Hz, DURCO PUMP:  SIZE 2 x 4 x 3-10 H/95, S/N 376144, 550 GPM. **SOLD**

PRC-002 - QTY (22) ALUMINUM TOTE BINS BY FABRICATED METALS, DRY MATERIAL STORAGE, 51" L x 44" W x 55" H, SLANT BOTTOM, ROUND COVE